Inner Range are world leaders in the design and manufacture of state of the art security solutions. Consultants who specify their products, technicians who install them and consumers who use them all benefit on a daily basis from the pursuit of excellence that is the hallmark of Inner Range System Design.
- Inner Range System
- 20320 Concept 3000 / 4000 Standard 2 Door Access Module
- 20321 Concept 3000 / 4000 Cached Module
- 20322 Concept 3000 / 4000 Single Door Access Module
- 20324 Concept 3000 / 4000 Standalone 2 Door Access Module
- Concept 4000 Intelligent 2 Door Access Module
- 20420 Concept 4000 Intelligent 4 Door Access Module
- 20425 Concept 4000 Reader Expansion Board
- Concept 3000 / 4000 Control Equipment
- Concept 3000 / 4000 Alarm Equipment
- > Concept 3000 / 4000 Access Equipment
- 20320 Concept 3000 / 4000 Standard 2 Door Access Module
- 20321 Concept 3000 / 4000 Cached Module
- 20322 Concept 3000 / 4000 Single Door Access Module
- 20324 Concept 3000 / 4000 Standalone 2 Door Access Module
- Concept 4000 Intelligent 2 Door Access Module
- 20420 Concept 4000 Intelligent 4 Door Access Module
- 20425 Concept 4000 Reader Expansion Board
- Concept 3000 / 4000 Insight Software
- Concept Accessories
- Power Supplies
20320 Concept 3000 / 4000 Standard 2 Door Access Module
- In Large Cabinet with 1.75 Amp PSU
- Dual card, card and pin, anti-passback options available
- Card only operation also available
- Comprehensive interlocking
- System inputs:
- Separate EOL Supervised Door Reed and Tongue Sense Inputs for each door
- DOTL and Door Forced System Inputs
- All alarms generated by Inputs are programmable for reporting to a monitoring station
- Connects directly to the LAN
- Supports either Wiegand or Magstripe reader output format
- Compatible with 5 volt or 12 volt readers
- Supports the following card formats:
- Magnetic swipe, Magnetic swipe last, Magnetic insertion, Wiegand 26, 27, 30, 32, 34, 35 36, 37, 40 bit
- Support User Definable Card Format up to 40 bits (Wiegand) or 15 characters (Mag Swipe) as well with the new 4.5 firmware
- On-board diagnostic LEDs to assist with troubleshooting
- Up to 2 readers can be connected
- 2 lock relays switching up to 5 amps DC
- Each door has:
- Door Reed Input - Tongue Sense Input - REX and REN Inputs
- 3 Auxiliaries typically for Valid & Invalid Card and DOTL warning
- Selectable single door or two door mode access mode
Additional options:
- 20320C: Concept 3000 / 4000 2 Door Access Module on Chassis with 1.75 Amp PSU
- 20320CB: Concept 3000 / 4000 2 Door Access Module on Chassis with 2 Amp Low Battery PSU
- 20320L: Concept 3000 / 4000 2 Door Access Module in Large Cabinet with 1.75 Amp PSU
- 20320LB: Concept 3000 / 4000 2 Door Access Module in Large Cabinet with 2 Amp Low Battery PSU
- 20320P: Concept 3000 / 4000 2 Door Access Module - PCB only
- 20320SB: Concept 3000 / 4000 2 Door Access Module in Standard Cabinet with 2 Amp Low Battery PSU
Downloads:
